Wild West Hardware

Premium Decorative Nail Head, Oil rubbed bronze finish, heavy distressed with stainless steel screw- 1 1/2" dia. head, This is for a package of 6

Wild West Hardware

$ 14.50 $ 18.54
SKU: CL-SSTL-HEAVYDISTR-150-ORB-6 pack

Share:

This is for a quantity of 6 pieces and are ON SALE! (while supply lasts)
These clavos have a very distressed surface 
Head is a zinc alloy (won't rust)
1 1/2" Dia. Head Size with heavy distressed effect
Oil Rubbed Bronze finish (near black)
Screw length is approx. 3/4"
(has self-tapping stainless steel screw)
Can be hammered in with pre-drilled hole or screwed in with pre-drilled pilot hole


Our Premium Line

These quality made decorative nail heads are made to endure almost any weather condition.
Typically used on wood doors, gates and overhead doors.
Head is made of a zinc alloy with stainless steel screw fused to underside. Has durable oil rubbed bronze plated finish
Has "heavy distressed" look.
Features / Advantages:

1. Will not rust (avoids rust bleed on wood)

2. Can be removed and re-attached for re-finishing door or gate

3. Great for garage doors where vibrations may loosen nail-in type

4. Excellent for all weather conditions including, rainy humid regions and coastal areas.

5. Possible use on fiberglass and metal doors

#CL-SSTL-HEAVYDISTR-150-ORB -6

Made in the USA 

Installation tip for metal, fiberglass or composite doors:
To apply the screw type, you will need to drill a small pilot hole first  (smaller than the diameter of the screw, just as you would in wood), then hand turn them in using a rubber glove to get a good grip on them.  You will also need to apply a small dab of sealant over the pre-drilled pilot hole in order to seal the hole.  (silicone sealer or Liquid Nails are examples).  Be sure to check to see if your warranty may be voided by drilling holes in door.